Just Add Power Ships HDMI AV-Over-IP Wall Plate

jaddp.jpg

Just Add Power (J+P) announced this week that its new third-generation (3G) thin two-gang HDMI wall plate transmitter is now shipping. The VBIS-HDIP-707WP2 allows users to incorporate laptops and other HDMI devices as sources for its 1G AV-over-IP systems at a depth of only 1.5 inches. Offering ultra-low latency (JPEG2000 compression), the VBIS-HDIP-707WP2 wall plate […]

Read more

Dante Details CEDIA 2019 Plans

Dante-CEDIA2019.jpg

Audinate says that Dante is seeing rapid adoption by manufacturers of residential audio equipment. Dante is already widely used by integrators in the commercial installed AV market to deliver systems with many uncompressed audio channels over a standard Ethernet network. Audinate says Dante’s introduction to the residential market brings cost reductions and installation time savings […]

Read more

Just Add Power Adds Dante Sound System Transmitter

JustAddPower-Dante.jpg

Just Add Power announced its new line-up for InfoComm 2019, including the new 767DSS Dante Enhanced Sound System transmitter. The transmitter adds compatibility with Dante and AES67 audio networks to Ultra HD over IP systems, with separate switching of audio and video. The 767DSS transmitter supports the latest Dante eight-channel chipset. The transmitter allows installers […]

Read more

Just Add Power Adds Dante and AES67 Audio to the Ultra HD-Over-IP Family at ISE 2019

JustAddPower-Dante.jpg

Just Add Power (J+P) announced its technology lineup for Integrated Systems Europe (ISE) 2019, taking place Feb. 5-8 at the Amsterdam RAI Exhibition and Convention Centre. In Stand 1-N110, where the company’s new 3G+ 767DSS Dante Enhanced Sound System transmitter (1G AV-over-IP) will debut. It adds compatibility with Dante and AES67 audio networks to Ultra […]

Read more

Just Add Power Expands 3G HD-Over-IP Series with Point-to-Point PoE Transmitter

justaddpower-3g-1118.jpg

Just Add Power (J+P) announced the release of its new 709P2P 3G Point-to-Point Transmitter. The Power-Over-Ethernet (PoE) transmitter allows integrators to utilize a single power input to distribute video, audio, power and control to all downstream devices over Cat5e cable. The new J+P 709P2P 3G Point-to-Point PoE transmitter distributes video with HDCP 2.2 (4:2:0 Color) […]

Read more

Just Add Power to Debut New OS and Adds 4K-over-IP PoE Daisy Chain Receiver

Just-Add-Power-VBS-HDIP-3G.jpg

Just Add Power (J+P) will be at CEDIA to demonstrate its new 3G Ultra HD over IP Series Daisy Chain Receiver and launch Just OS, its family of firmware and app-based solutions for control and management of video distribution on any network. Just OS will feature the company’s latest firmware update, Every Switch Supported (ESS). […]

Read more

Just Add Power Adds Daisy Chain Receiver to 3G Ultra HD-Over-IP Series

just-add-power.jpg

Just Add Power (J+P) today announced the new VBS-HDIP-3G 509POE Daisy Chain Power-over-Ethernet (PoE) Receiver. The receiver allows installers to add multiple network devices at the endpoint or to add more receivers for customized installations. The port also passes PoE to connected devices. The new J+P VBS-HDIP-3G 509POE daisy chain receiver distributes Ultra HD and […]

Read more

Just Add Power Expands 3G Ultra HD Over IP Portfolio With New HD-SDI Transmitter

justaddpower.jpg

Just Add Power (J+P) has unveiled the 725POE 2GΩ/3G+ SDI Power over Ethernet (PoE) transmitter at InfoComm, adding SDI video sources to a 4K system. The new J+P 725POE 2GΩ/3G+ SDI PoE transmitter provides SD-/HD-/3G-SDI format support to Just Add Power’s 3G HD over IP system. Eliminating the need for an SDI-HDMI converter in the […]

Read more

Just Add Power Adds More Installation Flexibility to the 3G Ultra HD Over IP Platform at InfoComm 2018

jp.jpg

Just Add Power (J+P) announced that it will debut the new 725POE 2GΩ/3G+ SDI Power over Ethernet (PoE) transmitter alongside the new rackmount 3G Ultra HD over IP PoE transmitter and award-winning 3G+4+ Tiling Transmitter at InfoComm 2018, June 6-8 at the Las Vegas Convention Center, in booth N464. The company will also host Luxul, […]

Read more

Just Add Power Pushes 4K Latency Spec to 16ms from Source to Screen

justaddpower-ultrahd-0418.jpg

Just Add Power (J+P) announced that its 3G Ultra HD Over IP series of solutions has been updated to send 4K video-over-IP with a 16 ms latency spec from source to screen. This is important because many AV-over-IP vendors lie and say “zero latency.” Using JPEG 2000 compression and aimed at ballparks, arenas, command centers and corporate AV 4K installations, J+P’s […]

Read more

Just Add Power Adds Rackmount Version of 3G Transmitter

justaddpower.png

Just Add Power (J+P) announced the rackmount version of its 3G Ultra HD Over IP Power over Ethernet (PoE) transmitter. The new J+P 1RU rackmount VBS-HDIP-747 3G Ultra HD (4K@30Hz 4:2:0)over IP PoE transmitter provides the same features as the VBS-HDMI-707 PoE TX as both models distribute 4K video with HDR via JPEG2000 over IP and support HDCP 2.2, […]

Read more

Just Add Power to Demonstrate 3G+4+ Tiling Transmitter at ISE 2018

JP_759A_Tiler-0118.jpg

Just Add Power (J+P) today announced it will demonstrate its 3G+4+ Tiling Transmitter at ISE 2018 in Amsterdam. The world’s first 4K network video tiler, it allows any four 4K source devices to be displayed on a single screen instantly. Added to the J+P Ultra HD over IP matrix switching system, it enables users to simultaneously watch four 4K video […]

Read more

Just Add Power to Showcase Video Distribution Solutions at ISE 2018

JP_707POE-0118.jpg

Just Add Power (J+P), the leader in Ultra HD over IP, is bringing its host of switching and scaling solutions to ISE 2018, Feb 6-9 at the RAI in Amsterdam. At the show, J+P will demonstrate its 4K network video tiler; the 3G+4+ Tiling Transmitter; the Switch Please web application, which allows for matrix switching of J+P devices from […]

Read more

Just Add Power Simplifies Matrix Switching With New App

justaddpower-0917.jpg

Just Add Power (J+P) announced its Switch Please web application at CEDIA 2017, Sept. 7-9, at the San Diego Convention Center. Part of the latest development to its innovative approach to IP video distribution, the free Switch Please app is dynamically generated based on the switch configuration of the installation. As a result, installers and end-users can easily switch J+P […]

Read more

Just Add Power to Debut New Products at CEDIA 2017

JP_759A_Tiler-0817.jpg

Just Add Power (J+P) will demonstrate what it’s claiming will be the world’s first 4K network video tiler, the 3G+4+ Tiling Transmitter and Switch Please, a new web application that allows for matrix switching of J+P devices from any web browser, along with its new Plug-Play-Present firmware. Now shipping, J+P will demonstrate its 3G+4+ Tiling Transmitter. This device can be […]

Read more

Just Add Power to Demonstrate AV-Over-IP at InfoComm 2017

JP_707POE-0517.png

Just Add Power (J+P), the leader in Ultra HD over IP, will display the new additions to its family of 2GΩ/3G devices, the new 2GΩ/3G+ Power over Ethernet (PoE) VBS-HDMI-715POE transmitter and VBS-HDMI-515POE receiver. With these solutions, integrators can build a scalable and cost-effective infrastructure to distribute sources up to 1080p resolution or meet evolving 4K requirements by […]

Read more

Just Add Power to Debuts Third Generation 4K-over-IP Video Distribution Platform

JP_707POE-0517.jpg

Just Add Power (J+P) will launch its 3G Ultra HD over IP family of transmitters and receivers at InfoComm 2017. Designed for any size UHD distribution and matrixing application, the expanded 3G Ultra HD over IP family offers a variety of devices that enable integrators to mix and match models to better manage their hardware […]

Read more

Just Add Power to Debut 3G Ultra HD Over IP and 2GΩ/3G+ PoE at InfoComm

JP_759A_Tiler-0517.png

Just Add Power (J+P) will launch a new 3G Ultra HD over IP transmitter (707POE) and receiver (508POE), 2GΩ/3G+ PoE options, 3G+4+ Tiling Transmitter and the Plug-Play-Present application that adds simple logic control to any transmitter in booth 4081 at InfoComm 2017. New for the show is the J+P web-based control application, which allows users to easily control the company’s video […]

Read more

Just Add Power Announces ISE Plans, Including Two New Additions to 3G Ultra HD Over IP Line

justaddpower-ise-0116.jpg

Just Add Power (Stand 5-R108) has announced that its range of Ethernet-based HDMI distribution devices will expand further with the launch four new products at Integrated Systems Europe in Amsterdam. Most notably, two new products are being added to their latest 3G Ultra HD over IP platform- which was winner of ‘Best Multiroom AV’ product […]

Read more

Just Add Power to Debut 3G Ultra HD Over IP to Debut at CEDIA 2015

justaddpower-ultrahd-0915.jpg

Just Add Power will debut (3G) Ultra HD over IP transmitters and receivers with built-in 4K scaler at CEDIA. According to Just Add Power (and these are big claims), 3G Ultra HD over IP can simultaneously deliver multiple sources of 4K content with HDCP 2.2 from HDMI 2.0 devices, as well as 1080p and lower content from […]

Read more

Just Add Power Adds Image Play Video Tiling to HD Over IP More Play Feature Set

justaddpower-imageplay-0615.jpg

At InfoComm 2015 Just Add Power debuted the 2G+4+ Tiling Transmitter with Image Play, which gives integrators the ability to display multiple video feeds on a single screen. The 2G+4+ device is a 1U rack-mountable video tiling processor that enables commercial integrators to deliver four HDMI sources to a single screen in a variety of […]

Read more