Atlona has debuted its next generation of AT-HDR-SW Series of HDMI switchers and matrix switchers. Available immediately, the three new matrix switchers are spec’d to deliver 4K/UHD video @ 60hz (4:4:4), as well as HDMI data rates up to 18gbps and support for high dynamic range (HDR) formats. All models offer a compact design for under-table mounting inside meeting and learning spaces.

Each model has five HDMI inputs:

• AT-HDR-SW-51 (one HDMI output) — An ideal choice for conference rooms and meeting spaces, the HDR-SW-51 can also feed larger, multizone distribution platforms such as Atlona’s OmniStream AV-over-IP systems.
• AT-HDR-SW-52 (two HDMI outputs) — Ideal for presentation spaces where two displays are needed, the HDR-SW-52 is a matrix switcher that can feed separate content into dual, side-by-side presentation displays. Outputs can be mirrored or matrixed via selectable switching modes.
• AT-HDR-SW-52ED (matrixed HDMI and HDBaseT outputs) — Offering the same benefits and features as the HDR-SW-52, this model’s HDBaseT output transmits video, embedded audio and Ethernet over distances up to 330 feet, and pairs perfectly with the Atlona AT-HDR-EX-100CEA-RX receiver. The HDR-SW-52ED can serve as a lectern-installed confidence monitor inside auditoriums and lecture halls alongside the main projector. It is also ideal for meeting rooms to feed into a main display and a secondary display along a side wall.

Part of the family of Atlona 4K HDR integration products, the HDR-SW Series also builds in EDID management features, automatic input switching and HDCP 2.2 compliance. Additionally, 4K downscaling to 1080p at 60, 30, or 24 hz is available when connected to an HD display. All three models can de-embed audio from an HDMI input to S/PDIF or balanced analog audio outputs and are controllable via Ethernet, RS-232 and IR.