Upscaling the system to accommodate multiple sources and displays is easy, with the ability to support potentially hundreds of displays provided the network can accommodate 4K signal transmissions. When configured on a network, multiple sources and displays can be integrated and content can be delivered in a multitude of combinations. Integrators can create user-configurable video walls supporting multiviews for commercial applications with a very low bandwidth solution. This transmitter also supports a MotionJPG (MJPG) video codec setting for low latency applications. The transmitter provides a two-channel audio input that can be delivered alongside HDMI on the receiving end.
While RS232 and directional IR are provided for the remote control of sources, this transmitter works with the MuxLab ProDigital Network Controller (model 500812), an auto-configuration system that detects equipment and simplifies IP-system access, configuration and control with a user-friendly interface. When combined with the MuxControl app, any smart device can provide end-user access and control, freeing the user to deliver content anywhere with complete mobility.
Sources can connect to the Ethernet switch using standard CAT5e/6 cable from up to 100 meters away, allowing integrators to keep equipment secure and away from the end-user environment. Once connected, video is delivered up to 4K@60Hz resolutions. PoE is supported, eliminating power requirements.