MuxLab Debuts New SDI Converters

MuxLab-SDI.jpg

MuxLab unveiled two new SDI converters today, including the 12G-SDI to Quad/Dual Link SDI Converter (model 500725) down-scales a 12G-SDI signal to a lower bandwidth dual link 6G-SDI or quad link 3G-SDI format. The lower bandwidth standards are output via traditional coaxial cable using BNC connectors. The Converter has one BNC input supporting 12G-SDI and […]

Read more

MuxLab Expands 4K Signage Player DigiSign CMS

MuxLab-4Ksignageplayer.jpg

MuxLab has a new digital signage player — the 4K Digital Signage Media Player (model 500769) that’s integrated with DigiSign CMS software. MuxLab says that DigiSign has a simple interface to gather, load and schedule content and that it’s designed for any size signage system. Content from various sources can be autonomously scheduled for weeks, […]

Read more

MuxLab Integrates Scheduling with New DigiSign Software

MuxLab-DigiSignsoftware.jpg

MuxLab’s on-board CMS system, DigiSign, works with the company’s Digital Signage Media Player (model 500769) to manage and control AV content from a variety of sources. It fully supports streaming content via the H.264/H.265 codec over a local Ethernet or the Internet as well as content loaded onto its internal memory drive and via external […]

Read more

New MuxLab IP H.264/H.265 PoE Transmitter Supports 4K@30Hz AV-over-IP

MuxLab-PoETransmitter.jpg

MuxLab’s new HDMI over IP H.264/H.265 PoE Transmitter is specified to transmit 4K/30 AV-over-IP. It also claims less than 200ms latency (in low latency mode) with H.265 compression of 4K. Each of MuxLab’s transmitters can connect AV equipment to a network from up to 100 meters in distance using a standard Cat5e/6. Once on the […]

Read more

Two 1Gig Ethernet 4K Wall Plate Extenders from MuxLab Are AV-over-IP

MuxLab_AVoverIP.jpg

Two new brushed metal wall plate enclosures from MuxLab are IP-based extenders that support HDMI 2.0b formats and 4K@60Hz resolutions. The wall plates can be configured and controlled remotely from any tablet, laptop or phone when combined with MuxLab’s ProDigital Network Controller (model 500811) and the new MuxControl App for Android and iOS. MuxLab’s HDMI/VGA/USB […]

Read more

MuxLab Debuts at CEDIA

MuxLab-CEDIA2018.jpg

In addition to its complete family of AV over IP solutions for residential applications, MuxLab is showcasing several new products and an app at the annual home tech tradeshow event. With end user satisfaction in mind, two new wall plate transmitters offer a slick method of AV connectivity with brushed metallic enclosures that look great […]

Read more

MuxLab Unveils New Content Management Software on 4K Signage Player

muxlab.jpg

MuxLab has released its new 4K Signage Player (model 500769) with complete Content Management Software (CMS). This new software system allows users to create, manage and control AV from a variety of sources, including content streaming via the H.264/H.265 codec over a local Ethernet network, Internet, internal memory and external USB 3.0 memory devices. It […]

Read more

MuxLab Releases New HDMI 4×1 Switcher with Audio Extraction

muxlab-0418.jpg

MuxLab just debuted a new 4×1 HDMI switcher (dubbed the Model 500437) with audio extraction and 4K/60 (4:4:4) and support for 12-bit Deep Color and 3D viewing. In addition, the switcher extracts digital audio from each source, and outputs it as S/PDIF Toslink or two-channel audio. Specifically, it extracts LPCM 2.0 or 5.1, Dolby 5.1 and DTS 5.1 audio and delivers […]

Read more

MuxLab Debuts 4K60 Fiber Transmitter/Receiver and Controller Set

muxlab-fiber-0218.jpg

The MuxLab AV-over-IP 4K/60 (4:2:0) uncompressed extender uses fiber (model 500761) to route video over the network. It connects sources to displays through a 10Gig Ethernet Switch (SDVoE) and it supports both HDMI and DisplayPort inputs. The systems’ transmitters and receivers can connect to the switch using OM4 multimode fiber cable, effectively transmitting up to 1,300 feet (400 meters) in distance so equipment […]

Read more

MuxLab’s Broadcast Line Offers New ST-2110-Ready Solution for AV over IP Systems

muxlab-broadcast-0118.jpg

The newly released SMPTE ST-2110 standard serves to alleviate concerns about compressed video traffic and delivery over managed IP networks. MuxLab’s new 4K extender for broadcasters resolves this concern by using an uncompressed transmission over IP networks in the studio or for live production and is also an ST-2110-ready solution, the new industry standard. MuxLab’s SDI over IP 4K Uncompressed Extender […]

Read more

MuxLab Intros Two Portable Signal Generating Testing Tools

muxlab-signal-gen-0617.jpg

At InfoComm, MuxLab will unveil its line of accessories for AV integrators. The HDMI 2.0/3G-SDI Signal Generator (500830) and the HDMI 2.0/3G-SDI Signal Analyzer (500831) work separately or in tandem to provide all the tools needed to quantify and qualify AV signal delivery in the field.  Both units are portable for autonomous operation anytime and anywhere and support up to […]

Read more

MuxLab Brings New Selection of Pro Audio Integration Solutions to InfoComm

muxlab-0617.jpg

Three new products from MuxLab are designed to help integrators create unique, audio-based infrastructures that are IP-based.  Available for the first time at InfoComm are the Dante/Quad Channel Audio PoE Gateway (500765), the Audio/AMP over IP Extender with Mic (500755-AMP) and the 70v Audio Converter (500755-70V).Analog audio sources can be sent to Dante-compatible professional audio equipment using an IP […]

Read more

RTI Intros New Driver for MuxLab’s AV Over IP Solutions

ml500811-1116.jpg

RTI today announced a two-way driver for MuxLab’s ProDigital series of AV over IP products. The new driver allows integrators to easily incorporate MuxLab AV devices into RTI automation and control systems, providing powerful yet simple video control for commercial and residential applications. Developed by RTI through MuxLab’s partner program, the two-way driver allows direct […]

Read more