The ATND931 and ATND933 join the ATND8677 Microphone Desk Stand and ATND971 Network Boundary Microphone, the world’s first wired microphone products to transmit both audio and control data using the Dante network protocol. A simple Ethernet connection allows these microphones (powered by network PoE) to communicate across an existing network of Dante-enabled devices.
The ATND8734 Ceiling-Mount Power Module with Dante Network Output is designed to be permanently installed in a U.S. standard metal 2-gang electrical box, and comes equipped with an 80 Hz low-cut UniSteep filter, selectable for a flat response or low-frequency roll-off, as well as a three-position input gain level selector (+30 dB, +40 dB, and +50 dB) and green/red LEDs. All features may be configured and controlled remotely via third-party software. Audio-Technica has been working closely with industry-leading DSP manufacturers including Biamp, Symetrix and Bose to ensure Dante-compatible logic and remote control software integration for simple, flexible operation without the need for additional cabling.
An RJ45 connector provides plug-and-play access to the Dante audio network over CAT5e (or better) cable. The power module’s circular cover plate, which may be painted with commercially available spray paint.