MuxLab’s SDI over IP 4K Uncompressed Extender (model 500767) connects cameras and other video sources to multiple displays. All equipment links to a 10Gig Ethernet switch through individual transmitters and receivers to support point-to-multipoint and multipoint-to-multipoint configurations. Making use of 10Gig Ethernet switches with fiber stack ports allows for even greater distance extensions between sources and sink devices. Using the IP-based configuration, hundreds of sources and displays are supported on the same IP infrastructure. A virtual matrix of broadcast cameras, mixers, displays and other equipment may be interconnected and rearranged at the click of a mouse, all managed from a central location. A free firmware update will enable full ST-2110 support in the first half of 2018.
Alternatively, this same Extender supports point-to-point configurations by connecting a transmitter directly to a receiver. HD/3G/6G-SDI sources and sink equipment can be extended up to 400 meters using multimode fiber cable, or up to 30 meters using standard CAT5/6 cable. An RS232 port is provided for remote control of end devices.
Both scenarios support uncompressed video resolutions up to 4K@30Hz (4:4:4), providing unaltered high quality video transmission with zero latency. Here are all the details.