THE #1 AV NEWS PUBLICATION. PERIOD.

ZyPer4K HDMI Encoder Will Add Loop-Out at InfoComm 2019

ZeeVee is introducing the ZyPer4K encoder with switchable dual HDMI inputs and an HDMI loop-out at InfoComm 2019. The new model enables users to switch between input sources, with an additional HDMI loop-out port that provides monitoring of the first HDMI input source to a local monitor or the streaming of this content to mobile devices and desktops in additional locations through a connected H.264 encode. ZeeVee’s ZyPer4K encoders claim sub-1ms latency with its 10G Ethernet SDVoE-based AV-over-IP line.

Using industry standard Cat6a cables or fiber, the ZyPer4K can send AV from HDMI (with full HDMI 2.0 and HDCP 2.2 capability), SDI, DisplayPort, and analog sources, over standard 10g Ethernet switches to displays that can be up to 100 meters away from the switch. The ZyPer4K also provides the option to extend USB, IR and RS232 connections over the network for the use and control of connected devices such as displays, keyboards/mice and cameras.

In addition to its 10Gb Ethernet connection, each ZyPer4K encoder and decoder unit has a 1Gb network port that can be used for any IP network device including digital signage media players, IP Cameras, video/audio conferencing equipment and even Wi-Fi network equipment without extra cabling.

Here are all the specs.

Check out a video of the Zeevee ZyPer4K Encoder and Decoder from ISE 2019 below:

Top