HUDSON, WI – January 20, 2021

This high-powered paging amplifier adds loud ringing, voice paging, and background music to VoIP SIP hosted phone service or a premise-based PBX.

“Building on the success of our IP paging line, this high-powered IP paging amplifier is unique in it’s usability and efficiency.” – Paul Speltz, Engineer, Viking Electronics

The PA-250-IP is a 250-Watt rack mounted paging amplifier for 25V and 70V paging speakers and horns. Initiate voice paging with the PA-250-IP as a Unicast end point or add the PA-250-IP to a paging group for Multicast paging.

Additional inputs on the PA-250-IP allow for a contact closure to activate a door chime tone, a 1/8-inch audio jack for background music which mutes during a voice page, and a 600 Ohm AUX input for line level audio sources providing mass notifications, pre-recorded messages, or scheduled tones. 

The PA-250-IP features individual level controls with LED indicators for each input, automatic peak limiting, multiple amplifier protection modes, an adjustable Automatic Level Control, and Bass & Treble controls. For more power/speakers, multiple units can be daisy chained together using the 600 Ohm output.

For more information on the PA-250-IP, visit: 

https://www.vikingelectronics.com/products/pa-250-ip/