Symetrix Adds Features at InfoComm 2019

Symetrix-IC2019.jpg

Symetrix’s Composer 7.2 DSP- and control-programming application adds a number of important features, including monitoring of Powersoft Duecanali, Ottocanali, X4 and X8 amplifiers and Panasonic WP-9XX amplifiers. A new emailer control output module, when triggered, can send an email message with predetermined subject and body copy to a predetermined email address via a predetermined email […]

Read more

Symetrix Announces Release of SymVue for Control Server

symetrix-1.jpg

Symetrix has announced the release of its SymVue software for their Control Server hardware. SymVue is a server-based application designed to control Symetrix DSPs. SymVue enables custom GUIs authored using Symetrix Composer running on the Symetrix Control Server hardware. Application-specific control screens can be designed and tested in minutes, without writing any code. With SymVue […]

Read more

Symetrix Introduces Composer 7.0

symetrix.jpg

Symetrix has released the latest version of its Composer programming software for Edge, Radius, Prism and Solus NX DSPs. With Composer 7.0 integrators can program a complete end-to-end DSP signal path using just one application. Composer 7.0 integrates support for the next generation of Symetrix hardware, Radius NX, as well as full integration with SymVue […]

Read more

Symetrix Radius NX Series Claims Leap Forward for Audio DSPs

symetrix.jpg

Symetrix announces its Radius NX 4×4 and Radius NX 12×8 1U rack-mount audio signal processors. Each model supports 128 (64×64) channels of redundant Dante network audio and delivers Symetrix’ famed audio quality, including ultra-low-noise pre-amps with digitally controlled 3 dB gain steps. The two new Radius NX processors are programmed using Symetrix’s Composer software for […]

Read more

Tony’s Faves from InfoComm 2018

InfoCommStage.jpg

  InfoComm is the largest, most exciting event in North America focused on the pro-AV industry, with 1,000 exhibitors, thousands of products, and 44,000 attendees from 110 countries. I had the pleasure of attending this year, and it was a blast! The following is a list (not in any particular order) of my favorite booths, […]

Read more

Atlona and Symetrix Partner on AV over IP Deployments

atlona-symetrix-0518.jpg

Atlona and Symetrix have struck a strategic alliance headed into InfoComm 2018 (June 6-8, Las Vegas Convention Center). Specifically, the companies say their new collaboration will simplify how systems integrators design and deploy networked systems to and from the digital signal processor (DSP), with intelligent on-off ramps for audio, video and peripherals. At InfoComm, Symetrix will specifically demonstrate AES67 ingest from an HDMI source via an Atlona […]

Read more

Symetrix and Visionary Solutions Expand Strategic Alliance

symetrix-visionary-solutions-0518.jpg

Symetrix and Visionary Solutions have announced native integration of Visionary Solutions’ PacketAV Duet Dante-enabled IP video encoder and decoder products into Symetrix’ Composer DSP programming and control software. The integration, co-developed by Symetrix and Visionary Solutions, enables PacketAV Duet and E/D4100 video encoders and decoders to appear as native units in Composer 7.1 and later. Harnessing the flexibility and scalability of […]

Read more

Symetrix Composer 6.0 Adds Dante Enhancements

SYM-PP4_Dante_User_Library-0118.jpg

Symetrix has released the latest version of its Composer programming software for Edge, Radius, Prism and Solus NX DSPs. In addition to DSP design, Composer v6.0 for Windows natively configures the setup and routing of Symetrix Dante I/O expanders, along with select third-party Dante devices. With Composer, integrators can program a complete end-to-end DSP signal path using just one application. Composer 6.0 […]

Read more

Symetrix Releases Control Server, USB Audio Card and Composer v5.6

SYM-ControlServerStack_w-iPad-Phones1-1117.jpg

Symetrix, Inc announced this week the release of the Control Server platform, as well as the USB Audio Card for its Dante-enabled Radius and Edge DSPs and an update to Composer v5.6, its award-winning open architecture design software. Control Server is a web services platform for control of network AV systems, including Symetrix Radius, Edge, Prism, and Solus NX […]

Read more

NYDSW: NEC Display Partners Introduce Their Audio Solutions at the New York Showcase

NECNY-audio.png

At Digital Signage Week, several manufacturers presented their audio solutions and integration with NEC at the NEC New York Partner Showcase.   Symetrix talked about their integration with Dante.   Stewart Audio introduced their new amplifier for Date network.   Stewart Audio also explained their new 8 channel 50 watt amplifier.   Innovox showed off […]

Read more

Symetrix Expands Dante DSP Line with Prism 0x0

SYM-Prism-0x0-Mon-iPad-1016.jpg

Symetrix announces Prism 0x0, the latest in the company’s award-winning Prism series of Dante-enabled DSPs. Offering expansion via 64 channels of bi-directional Dante networking, the new Prism 0x0 delivers cost-effective processing, mixing, and routing for Dante-enabled endpoints, while providing exceptional sound quality.Used as the DSP core of a Dante network, or as a DSP co-processor, […]

Read more

Symetrix Composer v5.1 Claims Faster Programming and Control

SYM-Composer51-0516.gif

Symetrix has released the latest version of programming software for Edge, Radius and Prism DSPs. In addition to DSP design, Composer v5.1 for Windows natively configures the setup and routing of Symetrix Dante I/O expanders, along with select third-party Dante devices. With Composer, integrators can program a complete end-to-end DSP signal path using just one […]

Read more

Symetrix Adds to Dante DSP Product Line With Launch of Prism

symetrix-dante-0116.jpg

Symetrix has announced the launch of its Prism digital signal processing platform. Joining the manufacturer’s line of Dante-enabled DSPs, Symetrix Prism has been developed to deliver networked audio processing for a wide range of installed sound applications. Symetrix Prism is comprised of four products, varying only in I/O count and form factor. Prism 4×4 features […]

Read more

Symetrix Adds Trio of New Control Options for SymNet DSPs

symnet-composer-0815.jpg

Following the launch of SymNet Composer 4.1, Symetrix has added to its control and command offering for SymNet open architecture Dante-scalable DSPs with the addition of three new control options. The first of these options, the ARC-3 wall panel remote, was introduced to the systems integrator community at ISE 2015. Arriving in a single SKU […]

Read more

Symetrix Launches New SymNet Radius 12×8 EX DSP

symetrix-symnet-0115.jpg

Symetrix has just launches a new Dante-enabled 12×8 DSP dubbed the SymNet Radius 12×8 EX (the EX stands for the added Expansion Slot). The I/O expansion slot supports all standard optional SymNet audio I/O cards, including analog, digital, AEC, VoIP and telephone. This flexibility paves the way for multiple system configurations: for example, a SymNet […]

Read more

Audio-Technica’s Dante-Enabled Products Compatible With Symetrix’s Newly-Released SymNet Composer 3.0

audiotechnica-symetrix-0115.jpg

Audio-Technica has announced that Symetrix’s newly-released SymNet Composer 3.0 open-architecture design software offers native integration of Audio-Technica’s ATND971 Dante-enabled cardioid condenser boundary microphone and the ATND8677 Dante-enabled microphone desk stand. Version 3.0 has built upon the native support of Audinate’s Dante media networking technology for select third-party devices in earlier releases, and extends support of […]

Read more

Symetrix Announces Integration with Shure, Audio-Technica Products in SymNet Composer 3.0

symetrix-symnet-1214.jpg

Symetrix has launched SymNet Composer 3.0, an update to its open architecture design software. Version 3.0 has built upon the native support of Audinate’s Dante media networking technology for select third-party devices in earlier releases, and extends support to Shure Inc. and Audio-Technica. Now, integrators can streamline their set-up procedures and achieve network discovery, Dante […]

Read more

Stewart Audio Launches Low-Power Networked Amplifier Series

AV25-2-NET+-0914.jpg

Stewart Audio this week introduced a family of four low-wattage, networked amplifiers that address the need for lower channel count support at the local amplification stage.  The new series brings the benefits of power-efficient digital audio networking to what Stewart believes is an underserved customer base, where consultants, systems integrators, dealers and end users require […]

Read more

The Power of Co-Marketing

Radii-EdgeMonitorAtterotechStewart-0614.jpg

Recently Symetrix announced a strategic partnership with Attero Tech and Stewart Audio. In a significant development for users of Audinate’s Dante audio networking technology, the current release of SymNet Composer open architecture design software for Edge and Radius Dante network audio DSP’s natively integrates select Attero Tech and Stewart Audio products supporting their network discovery, […]

Read more