Neutrik Americas Intros Three Line-Level DLINE Audio Interfaces with Dante Compatibility

Neutrik Americas introduced three new line-level DLINE audio interfaces: the NA-2I2O-DLINE, the NA-2I-DLINE and the NA-2O-DLINE. All three interfaces are designed to connect legacy audio gear to the newer Dante protocol. The NA-2I2O-DLINE includes two inputs and two outputs (similar to the prior NA2-IO-DLINE). For environments where both inputs and outputs are not required, the NA-2O-DLINE […]

Neutrik Americas Intros Three Line-Level DLINE Audio Interfaces with Dante Compatibility

Neutrik Launches New Outdoor-Rated RJ45 Data Connectors

The new Neutrik etherCON TOP cable connectors are outdoor-rated RJ45 carriers for 1 Gbit/s / 100W PoE Ethernet and network connections. The D-shape panel mount connectors are designed to “withstand the harshest environment and offer a unique teardrop design.” These cable connectors are robust, RoHS / REACH compliant, flame retardant, UV and corrosion resistant and […]

Neutrik Launches New Outdoor-Rated RJ45 Data Connectors

Neutrik Has EN/IEC 60799 Standard Cables; Use Them!

Under the latest legally binding international safety regulations, power connection and interconnection cord sets, for use with and within the full range of professional AV and IT devices and applications, require to be certified to the EN/IEC 60799 standard. Neutrik’s new preassembled, fully certified cord sets series provide a ready-made solution across a range of […]

Neutrik Has EN/IEC 60799 Standard Cables; Use Them!

NEUTRIK Debuts More Ruggedized FIBERFOX Connectors for Harsh Environments

NEUTRIK has expanded its fiber optic connectivity portfolio with the introduction of two new variants of its HMA expanded beam multimode connector system. Available in two- and four-channel configurations, FIBERFOX EBC25 is a ruggedized development of its FIBERFOX HMA expanded beam multimode fiber-optic connector system. FIBERFOX EBC25 chassis is a jam-nut design, “intended to meet […]

NEUTRIK Debuts More Ruggedized FIBERFOX Connectors for Harsh Environments

NEUTRIK Expands Its opticalCON ADVANCED Portfolio

NEUTRIK says its opticalCON ADVANCED fiber portfolio has been expanded by introducing two MTP high-speed, high-capacity connectivity systems, creating a standard solution for point-to-point connections in ProAV and broadcast applications. The company claims the single mode opticalCON MTP 16 and multimode opticalCON MTP 48 offer 16 and 48 data channels within a single cable, providing […]

NEUTRIK Expands Its opticalCON ADVANCED Portfolio

Neutrik Americas Expands FIBERFOX Rugged Fiber Optic Product Line

Neutrik Americas announced an expansion to its FIBERFOX rugged fiber optic product line. FIBERFOX “bridges the physical contact world and the expanded beam world using chassis connectors that accept standard LCs on one side and any MIL-DTL-83526 compatible cable connectors on the other.” The new EBC25 connectors feature green coloring, providing visual compatibility with similar […]

Neutrik Americas Expands FIBERFOX Rugged Fiber Optic Product Line

Neutrik Debuts Outdoor-Certified Airtight XLR and Locking RJ45/Ethernet Connectors

Neutrik is shipping its new REAN airtight chassis connectors. Available for both XLR and locking RJ45/Ethernet, the new REAN airtight chassis connectors provide rugged durability and robust connectivity tailored for outdoor and other harsh environments. REAN male, female and duplex male/female airtight XLR chassis connectors are available in both three-pole and five-pole configurations, and are […]

Neutrik Debuts Outdoor-Certified Airtight XLR and Locking RJ45/Ethernet Connectors

Neutrik Announces New XX Series powerCON and speakON Cable Connectors

Neutrik Americas, part of the Neutrik Group, the world’s leading provider of professional AVL connectivity solutions, announces a dramatic advance to its powerCON and speakON product lines. New XX series powerCON blue/grey and speakON 2- and 4-pole cable connectors feature new functionality, easier assembly, improved power handling capabilities, new certifications to all relevant modern safety […]

Neutrik Announces New XX Series powerCON and speakON Cable Connectors

NEUTRIK Launches Halo Line of Connectors With Patented Light Ring and More

NEUTRIK has announced the launch of its new Halo product range. NEUTRIK Halo products integrate a new patented light ring along with an asymmetrical, non-metallic push tab into the design of the company’s popular A series chassis connectors. Halo product variants include the NC3FAH2-LR-DAE and NC5FAH-LR-DAE female XLR connectors, the NC3MAH-LR and NC5MAH-LR male XLR connectors, and the NE8FAH-LR-DAE etherCON connector. By […]

NEUTRIK Launches Halo Line of Connectors With Patented Light Ring and More

NEUTRIK Introduces powerCON TRUE1 TOP L Input and Output Cable Connectors

NEUTRIK has introduced the powerCON TRUE1 TOP L input and output cable connectors. Carrying the -L suffix, these new connectors accept cable outer diameters of 10 – 16 mm (0.39 – 0.63 inches), making them ideal for hard service SOOW 12/3, SJOOW12/3 and H07RN-F3G2.5 cables. A patent-pending cable entry meets standards requirements for preventing disassembly […]

NEUTRIK Introduces powerCON TRUE1 TOP L Input and Output Cable Connectors

Neutrik Americas Announces FIBERFOX Fiber Optic Connection System for Use in Harsh Environments

Neutrik Americas announced the FIBERFOX Fiber Optic Connection System. Designed to meet the requirements of MIL-DTL-83526 Military Specifications, Neutrik’s FIBERFOX Fiber Optic Connection System is the ideal solution for use in harsh environments. FIBERFOX expanded beam fiber optic connectors utilize a lens to expand and accurately align the light emitting from an optical fiber. The […]

Neutrik Americas Announces FIBERFOX Fiber Optic Connection System for Use in Harsh Environments

Neutrik Group Restructures As a Multibrand Company

In a reorganization of its global operations, the Neutrik Group has restructured as a multibrand company under the NEUTRIK, REAN and CONTRIK brands. The reorganization took several months and has expanded and diversified the group’s product offering across a breadth of technologies and applications; including both within and beyond the entertainment and broadcast production sectors the company has […]

Neutrik Group Restructures As a Multibrand Company

Neutrik Updates Firmware for CL/QL Digital Mixing Console Series

Neutrik announced version 5.6 firmware update for its CL/QL digital mixing console series. Also, Yamaha has added preamp remote control options for Neutrik’s new NA2-IO-DPRO DANTE audio network device. With the CL/QL firmware update, Yamaha added this specific support for Neutrik’s I/O solution, adding more flexibility in a network setup for Line, MIC and AES […]

Neutrik Updates Firmware for CL/QL Digital Mixing Console Series

Neutrik Announces New Range of Product Solutions Aimed at Esports

Neutrik USA has announced the availability of product solutions aimed specifically at the esports market. Neutrik’s connectors and related products span the entire gamut of connectivity types, including analog, digital, low-voltage, power only, data, fiber, fiber plus copper, as well as Dante interfaces and PoE solutions. The result is a range of offerings that includes […]

Neutrik Announces New Range of Product Solutions Aimed at Esports

Neutrik Debuts opticalCON DRAGONFLY

Neutrik just announced the opticalCON DRAGONFLY Fiber Optic Camera Connector Series. The new DRAGONFLY series is aimed at the Broadcast and ProAV markets and its technology uses fiber lenses and fusion splicing to achieve a signal with minimal loss. DRAGONFLY is based on Neutrik’s patented XB2 Technology. Its fusion splice high-performance lens transmits UHD 4K […]

Neutrik Debuts opticalCON DRAGONFLY

Neutrik Debuts mediaCON Family of USB Connections

Neutrik USA has announced the mediaCON product family for interconnecting devices such as hard drives, cameras, video monitors, media capture equipment, audio interfaces and computer hardware with a lockable USB Type-C cable. Specified to handle all components designed for data rates up to 10 GB/s (USB 3.1 Gen 2), 100 watts power and 10,000 mating […]

Neutrik Debuts mediaCON Family of USB Connections

NEUTRIK Shows a Handful of New Products at ISE

NEUTRIK has introduced the XIRIUM PRO, a dedicated ‘studio quality’ digital wireless audio link and a cable replacement system offering robust, low latency, high-resolution digital audio signals over long distances. NEUTRIK’s new TOP product range addresses the demand for environmentally sealed connectors for use in heavy-duty and harsh environment applications with entertainment equipment like PA […]

NEUTRIK Shows a Handful of New Products at ISE

Neutrik Launches mediaCON USB-C Product Line

Neutrik AG launched the new mediaCON product family. mediaCON includes a lockable USB Type-C cables and panel sockets, with components designed for data rates up to 10 GB/s (USB 3.1), 100-watt power and 10,000 mating cycles. The flush-mount panel socket with push-pull locking mechanism, can be mounted from the front or the rear and the […]

Neutrik Launches mediaCON USB-C Product Line

NEUTRIK NA2-IO-DLINE Dante Interface Ships

The new NEUTRIK intelligent NA2-IO-DLINE Dante I/O interface is available. This new end-of-network device provides an easy solution for integrating analogue signal devices within Dante based AoIP networks. With two line level analogue inputs and two line level outputs, it can simultaneously integrate two analogue audio channels within a Dante network and output a Dante […]

NEUTRIK NA2-IO-DLINE Dante Interface Ships

Neutrik Announces NA2-IO-DLINE Dante I/O Interface

Neutrik USA announced the NA2-IO-DLINE Dante I/O Interface. A two-in / two-out device, the Neutrik NA2-IO-DLINE simultaneously converts analog signals to Dante and Dante signals to analog. Genuine Neutrik input and output XLRs, along with a locking etherCON connector, provide professional-level connectivity. Four LED indicators provide network status as well as DANTE SYS and SYNC status. The NA2-IO-DLINE […]

Neutrik Announces NA2-IO-DLINE Dante I/O Interface

ProCo Sound to Show Latest Dante-Enabled AoD I/O Modules at InfoComm 2018

ProCo Sound is introducing its new Dante AoD I/O Modules for a simple connection to a Dante network while also providing studio-quality, low-latency audio, at this year’s InfoComm show (Booth C1734). ProCo is also showcasing two new Dante interface enclosure options for both mobile and fixed applications. Built with uncomplicated designs and the highest quality […]

ProCo Sound to Show Latest Dante-Enabled AoD I/O Modules at InfoComm 2018

New True Outdoor Protection Product Range from NEUTRIK Debuts

In the field of outdoor event and broadcast production, adverse climate and other environmental conditions can impact negatively on the performance of equipment and the ultimate quality of production work. Environmentally sealed connectors are in great demand for heavy-duty and harsh environment applications with entertainment equipment like PA systems, lighting, signage and LED screens. So […]

New True Outdoor Protection Product Range from NEUTRIK Debuts

NEUTRIK Introduces New Dante I/O Interface

The new NEUTRIK intelligent NA2-IO-DLINE Interface enables integration of analog signal devices within a Dante AoIP network in just a few easy steps. This new end-of-network device offers two analog inputs and two outputs, enabling it to simultaneously integrate two analog audio channels within a Dante network or output a Dante stream as two analog channels. “The […]

NEUTRIK Introduces New Dante I/O Interface

Neutrik USA Debuts etherCON CAT6A Feedthrough Coupler

Neutrik USA has announced the new etherCON Cat 6A feedthrough coupler NE8FFX6-W. Accommodating Neutrik’s etherCON Cat 5 and etherCON Cat 6A cable carriers as well as standard RJ45 plugs, NE8FFX6-W features full 10-Gbit bandwidth along with IP65 ingress protection when mated to cables equipped with Neutrik’s NE8MX6 family of etherCON Cat 6A cable connectors.  A unique barrel design distinguishes NE8FFX6-W from its etherCON Cat […]

Neutrik USA Debuts etherCON CAT6A Feedthrough Coupler

BTX Receives Neutrik opticalCON LITE Certification

BTX announced today that the company has been designated by Neutrik, the manufacturer of audio connectors and receptacles, as a Certified opticalCON Cable Assembler (COCA) for its opticalCON LITE line of fiber-optic connection systems. Neutrik’s opticalCON LITE is a semi-rugged fiber optic connection for a wide variety of applications. Its lightweight, compact design, robust housing, […]

BTX Receives Neutrik opticalCON LITE Certification

Neutrik opticalCON MTP 12 LITE to Launch New Fiber Assemblies at InfoComm

Pro Co Sound is the manufacturer of Neutrik’s opticalCON MTP 12 LITE and ADVANCED Fiber Assemblies, which will be on display at InfoComm 2016 (Booth C9918). These cables are designed for UHD, 4K and 8K video production as well as fixed installations. They are rugged and lightweight 12-fiber mobile field cables that feature exceptional cable […]

Neutrik opticalCON MTP 12 LITE to Launch New Fiber Assemblies at InfoComm

Neutrik Announces XIRIUM PRO Cable Replacement System

Neutrik USA just announced the XIRIUM PRO Wireless Digital Audio System. Designed as a cable replacement system, providing audio signals to and from devices without long or complicated cable runs, XIRIUM PRO delivers studio quality, full bandwidth audio with extremely low latency that is free of any compression. Central to XIRIUM PRO’s is something called DiWA (Digital […]

Neutrik Announces XIRIUM PRO Cable Replacement System

NEUTRIK Debuts 10-Pin XLR Connector

Neutrik’s latest multi-pin product line for transmitting both data and power:  the 10-pin XLR line. Fitting in the same form factor as other XLR connectors, Neutrik’s 10-pin XLR is perfect for transmitting four twisted pairs of data at Cat 5e performance plus up to 16A of power @ 50V using two large, dedicated power pins. […]

NEUTRIK Debuts 10-Pin XLR Connector

Neutrik Expands opticalCON LITE Product Line

Neutrik USA has announced it has the expansion of its opticalCON LITE product line. Adding opticalCON LITE QUAD and MTP, opticalCON LITE now offers the same two-fiber (DUO), four-fiber (QUAD), and 12-fiber (MTP) channel counts as Neutrik’s opticalCON ADVANCED product line. The additions of the new Lite QUAD and Lite MTP products give broadcasters even […]

Neutrik Expands opticalCON LITE Product Line

NEUTRIK Expands D-SUB Adapter Product Line

Neutrik has announced an expansion to the company’s D-Sub feedthrough offerings, which are designed for audio networking and integration of equipment into video systems. In addition to the various male to female configurations, the NADB9 product offerings now include female to female products. These feedthrough adapters use the standard D-shape housing and are available in […]

NEUTRIK Expands D-SUB Adapter Product Line

Neutrik Intros Cat5e etherCON Right-Angle Feedthrough Connectors

Neutrik has announced its right-angle etherCON Cat 5e feedthrough connectors. A new alternative to Neutrik’s existing NE8FDP feedthrough connectors, which are terminated via an RJ45 connector plugged in straight from the rear, the new NE8FDP-R right-angle feedthrough connectors accept an RJ45 connector at the bottom rear. This right-angle orientation can be a space saver in […]

Neutrik Intros Cat5e etherCON Right-Angle Feedthrough Connectors

NEUTRIK Launches Third Generation etherCON Cat6A Product Line

Neutrik USA just introduced its third and most powerful etherCON range of products ever, etherCON Cat6A. Building upon its etherCON Cat5 and etherCON Cat6 lines, etherCON Cat6A products carry an “X” in their part numbers to differentiate them from other etherCON products. The new etherCON Cat6A line includes a cable carrier complete with a Cat […]

NEUTRIK Launches Third Generation etherCON Cat6A Product Line