Dynacord Updates SONICUE Sound System Software With Free Control App for iOS

Dynacord-Updates-SONICUE-sound-system-and-SONICUE-Control-app.jpg

Dynacord’s SONICUE sound system software has added the free SONICUE Control app for iOS devices. SONICUE sound system software addresses the entire sound system, and the release of SONICUE V1.2.2 adds enhanced functionality to the ecosystem. SONICUE Control is a panel-viewer app that allows users to operate control panels created using the SONICUE control panel […]

Read more

Electro-Voice Introduces MTS Loudspeaker System Series for Stadiums and Sports Venues

Electro-Voice-MTS-Speakers.jpg

Electro-Voice is expanding its portfolio of sound solutions for stadiums and sports venues with the global introduction of the MTS series of full-range, high-output, long-throw, point-source loudspeaker systems. Each MTS model is equipped with four 15-inch woofers and dual coaxial mid/high-frequency compression drivers. The system is capable of generating more than 151 dB peak SPL […]

Read more

Dynacord Intros MXE5 24 x 24 Matrix for IP-Based Peripherals With Dante and AES70-Compliant Control

dyancord.png

Dynacord’s MXE5 is a 24×24 matrix/communications hub for IP-based peripherals integrated with Dante and AES70-compliant control aimed at fixed installations in stadiums, sports venues, convention, conference and event centers, churches and larger educational facilities. Dynacord just improved the MXE5’s DSP configuration by adding the SONICUE sound system software for control. In addition, MXE5 now features […]

Read more

Presets for Fulcrum Acoustics Loudspeakers Now Available for Use With Dynacord Electronics

fulcrum-acoustic-dynacord-sonicue.png

Fulcrum Acoustic announced that manufacturer presets for the complete portfolio of Fulcrum Acoustic loudspeakers are now available for use with Dynacord electronics via SONICUE sound system software. This adds flexibility for consultants and integrators designing multibrand systems to align with specific application or budget requirements. A Fulcrum loudspeaker installation can now run on a single […]

Read more

Dynacord Updates SONICUE Software for Setup of Sound Systems

dynacord-sonicue.png

SONICUE sound system software addresses the entire sound system and encapsulates Dynacord’s core design philosophies of simplicity, clarity and transparency. Its design provides a comprehensive system overview, making it quicker to set up, tune and operate sound systems with minimal effort. Dynacord significantly expands the scope of SONICUE with the version 1.2 update. The new […]

Read more

Dynacord Adds First Member of Its MXE Matrix Mix Engine Series

dynacord-mxe5.png

Following the launch of the IPX and TGX amplifiers and SONICUE sound system software, Dynacord now adds the MXE5, its first member of the MXE matrix mix engine series. The 24 x 24 crosspoint-performance audio matrix offers both routing and mixing functionalities, with 12 analog mic/line inputs, eight line outputs and 24 Dante audio channels. […]

Read more

IPX Series Amplifiers Ship with New IRIS-Net Software Release

IPS-IRIS-1018.jpg

Dynacord’s IPX multi-channel DSP amplifiers, integrated with Dante and OCA (AES70) audio networking technology, are now shipping. The amplifiers are accompanied by the 4.0 release of IRIS-Net software for system configuration, remote control and management. The IPX Series comprises three four-channel and one eight-channel amplifier model, spec’d at 5 kilowatts, 10 kilowatts and even 20 […]

Read more

Dynacord Debuts New TGX Power Amplifiers

dynacord.jpg

Dynacord has just unveiled the new TGX power amplifiers. Engineered and manufactured in Germany, these power amplifiers are built as the ultimate amplification solution for medium to large-scale live performance sound applications. Featuring two models with four channels by 2,500 watts and four channels by 5,000 watts, Dynacord TGX power amplifiers offer a 4-ohm power […]

Read more

New Dynacord IPX Series Power Amplifiers with OMNEO Debuts

IPX-Series-KeyVisual-0218.jpg

Dynacord just launched their IPX series multi-channel power amplifiers incorporating the OMNEO IP networking architecture  The IPX series is comprised of three four-channel models and one eight-channel model, offering a power density of 5 kW, 10 kW and even 20 kW from a single amplifier with all channels driven. The IPX series amplifiers is designed for high-end fixed install venues, from concert […]

Read more

Dynacord Debuts PROMATRIX 6000 Public Address and Voice Evacuation System

Family-C_Promatrix_3-4-right_HighRes_30778-0917.jpg

The PROMATRIX 6000 Public Address and Voice Evacuation System from Dynacord now offers users new hardware and software features for enhanced functionality and use in larger applications. Using IP technology, PROMATRIX 6000 provides a highly flexible, reliable and secure system solution with superior audio quality and low latency. As installers can use existing networks in the building infrastructure, relying on IP […]

Read more

Dynacord Launches New Power Amplifiers for Live Events

DYNACORD_C_Series_heroshot_320pix1-0617.jpg

Dynacord will launch a new two new dual-channel power amplifier series at InfoComm 2017: the L Series and the C Series. Both amplifier series comprise a linear amp design and have a software tool that allows for full configuration, control and supervision of sound systems with multiple amplifiers. Four different models per series are available, […]

Read more