Bose is now shipping its new PowerShare adaptable power amplifier line, consisting of three 1U models: two- and four-channel fixed-install models (PS602 and PS604) and one two-channel portable amplifier (PS602P). Each model delivers 600 watts of power that can be shared across all output channels. With support for both low- and high-impedance loads up to […]

AudioControl is finally shipping their Architect series of multi-channel amplifiers in 12 or 16 channel options. The Architect ‘P’ Series delivers over 100 watts per channel into 8 ohms, 200 watts per channel into 4 ohms, all channels driven. Additional adjoining channels can be bridged to 400 watts. The Architect ‘P’ Series uses a cool […]

Extron is shipping the Extron XTRA Series XPA 1002-70V, a half rack 1U, convection cooled power amplifier delivering two channels of 100 watts rms for 70 volt distributed speakers. This professional grade amplifier features a 100 dB signal-to-noise ratio and 0.1 percent THD+N specifications. The XPA 1002-70V is an ENERGY STAR qualified amplifier with an […]

DPA Microphones furthers its reach with the introduction of the GSM4000 Gooseneck Shock Mount Accessory and MMP-G Modular Active Cable for MicroDot. These new accessories for the d:dicate Microphone Series gives users the ability to create a completely wireless microphone setup, while maintaining high-quality audio during performances. The MMP-G Modular Active Cable is an ultra-transparent […]

The new Bose PowerShare adaptable power amplifier line consists of three 1U models: two- and four-channel fixed-install models (PS602 and PS604) and one two-channel portable amplifier (PS602P). Each model delivers 600 watts of power that can be shared across all output channels. With support for both low- and high-impedance loads up to 100V, PowerShare amplifiers […]

Following on the launch of LUCIA 70 V output models during last year’s InfoComm show, LAB GRUPPEN is set to unveil three new LUCIA 60-watt power models at InfoComm in Las Vegas: LUCIA 60/2M, LUCIA 60/2 and LUCIA 60/1-70. Available with either four-in, four-out matrix-mixer (LUCIA 60/2M), two-in, two-out configuration (LUCIA 60/2) or two-in, one-out […]

QSC will expand its amplifier line. QSC is introducing two new models to the SPA Series amplifiers, well suited for use in corporate AV applications. The SPA2-200 and SPA4-100 offer two 200 watts or four 100 watts per channel into 8Ω and 4Ω outputs, with the ability to bridge channels for 70V and 100V capability. […]

Rotel Electronics has introduced the RA-1592 stereo integrated amplifier. The new RA-1592 uses a Class AB design with 200 watts per channel into 8 ohms, and features a rugged power supply with toroidal transformer, coupled to select T-network, slit-foil capacitors. The high performance preamplifier section incorporates a 32-bit 768KHz AKM digital-to-analog converter and analog stages. […]

Neets just announced it is shipping its new Neets Audio Preamplifier, Neets Audio Amplifier and Neets Rack Shelf. The Neets Audio Preamplifier is a network controlled audio preamplifier controlled through LAN or RS-232. The Preamplifier adds additional RS-232 and I/O ports for expansion of the AV system and integrates with Neets and 3rd party control […]

The new AtlasIED Series DPA series of amplifiers are network-ready DSP power amplifiers designed for both 70/100V and 8/4 ohm systems. Available in three models: the 600-watts DPA602, the 1200-watt DPA1202 and the 2400-watt DPA2402, all three incorporate on-board DSP and the graphical user interface (GUI) is embedded into the amplifier. You can configure and […]

Bogen Communications is introducing a new series of Class-D amplifiers with 150-watt and 250-watt output and each with exactly the same features. The GS150D and GS250D models include a newly developed Class-D amplifier which enables less heat dissipation than previous Bogen Gold Seal Series models, saving cooling costs. They are up to 50 percent more […]

Pioneer Pro Audio’s new XPRS Series of high-powered active speakers that integrate Powersoft amplifiers. The XPRS Series comprises the XPRS15 and XPRS12 — both two-way full-range speakers, and the XPRS215S dual 15-inch subwoofer. All three enclosures feature 15mm birch plywood construction for a dynamic sound. The XPRS15/12 has a 15/12-inch ferrite LF driver, a 1.75-inch […]

Swiss manufacturer Schertler announced the release of JAM, the third member of its “next generation” acoustic amplifier series. Representing an evolution of the company’s JAM 150 amplifier, this new five-channel “all-rounder” offers greater flexibility in both live performance and studio situations. The amp combines a comprehensive feature set with the updated technology and enhanced “look” that is […]

Audiocontrol is now shipping the Director Model M6400, its new high power matrixing amplifier with DSP control. The Director Model M6400, part of AudioControl’s new Matrix M Series, builds upon the success of AudioControl’s ‘The Director’ DSP Series driving sixteen channels of amplification in a 2U chassis that delivers 65 watts per channel at 8 ohms, 100 watts per channel […]

Claiming a new eco-friendly design, Martin Audio’s new MA5.0Q power amp is designed for both portable and installed systems and specified with four channels of 5,000 watts in a 1 RU enclosure. Minimum heat dissipation makes the MA5.0Q suitable for hot or otherwise challenging environments using a patented Class D output stage design. The MA5.0Q […]

Biamp Systems introduced four new amplifier models to it’s Tesira’s network amplifiers lineup. The four include the four-channel 175-watt AMP-4175R, the eight-channel 150-watt AMP-8150R, the four-channel 350-watt AMP-4350R, and the four-channel 300-watt AMP-4300R CV with constant voltage. The amplifiers feature dual AVB/TSN ports for tnetwork redundancy and feature slots for optional analog failover cards to continue signal flow if the […]

Designed for live events without compromising audio quality, the PreSonus HP2 stereo personal headphone amplifier is designed for driving wired in-ear monitors (IEMs), as well as headphones. Portable and compact, it offers two XLR line-level inputs and one stereo 1/8-inch headphone output with volume control. Operation can be switched between stereo and mono, and a […]

AudioControl unveiled its new series of multi-channel distributed audio amplifiers, the Architect ‘P’ Series, at CEDIA this week. These new models are available with 12 or 16-channels and have over 100 watts per channel RMS into 8 ohms or 200 watts per channel RMS into 4 ohms, all channels driven. Additional adjoining channels can be […]

Parasound has expanded its ZoneMaster custom installation amplifier line with the introduction of three new models. The six-channel Parasound ZoneMaster 650, four-channel ZoneMaster 450, and two-channel ZoneMaster 250 use the same 50-watt bridgeable amplifier circuits, offer the same quality sound, and deliver the same high levels of dependability as the company’s ZoneMaster 1250 Universal 12-channel […]

Bose Professional is now shipping four new dual-channel amplifier models from its broadened FreeSpace amplifier line. These models are optimized for premium commercial applications such as retail, restaurants and hospitality. There are two mixer amplifiers (IZA 2120-HZ, IZA 2120-LZ) and two expansion amplifiers (ZA 2120-HZ, ZA 2120-LZ) each at 120 watts per channel. FreeSpace amplifiers can be quickly […]

Bose Professional has broadened its FreeSpace amplifier line with a set of four dual-channel amplifiers optimized for premium commercial applications such as retail, restaurants and hospitality. There are two mixer amplifiers (IZA 2120-HZ, IZA 2120-LZ) and two expansion amplifiers (ZA 2120-HZ, ZA 2120-LZ) each at 120 watts per channel. FreeSpace amplifiers can be quickly configured […]

Extron has announced the availability of the Extron NetPA 502 AT and NetPA 1001‑70V AT, half rack 1U, convection cooled power amplifiers equipped with Dante digital audio networking. The NetPA 502 AT delivers two channels of 50 watts into 4 ohms, and the NetPA 1001‑70V AT provides a single channel of 100 watts at 70 […]

Bose Professional has broadened its FreeSpace amplifier line with a set of four dual-channel amplifiers optimized for premium commercial applications such as retail, restaurants and hospitality. There are two mixer amplifiers (IZA 2120-HZ, IZA 2120-LZ) and two expansion amplifiers (ZA 2120-HZ, ZA 2120-LZ) each at 120 watts per channel. FreeSpace amplifiers can be quickly configured […]

Bogen Communications will be introducing several new products at InfoComm 2015 including a line of compact, half-rack width amplifiers; a 500-watt amplifier; a compact line array loudspeaker system; and a digital loudspeaker controller. The CC4062MBT is the latest model in the CC-Series of amplifiers which are 40-watt compact amplifiers with varying inputs and features. The […]

HARMAN’s Crown Audio today announced the introduction of the XLS DriveCore 2 Series two-channel power amplifiers, offering a host of upgraded features including more flexible DSP band pass filtering, selectable input sensitivity, remote sleep mode trigger and sleek new styling. Four new XLS DriveCore 2 models are available including the XLS 2502, XLS 2002, XLS 1502 and […]

Bryston has launched the new BIT (Bryston Isolation Transformer) models aimed at larger applications. The new 45- and 60-amp models feature a 220/240-volt input with a 120-volt output and are available with or without AVR technology (Automatic Voltage Regulation). In addition to these new models, all BIT products will now be available with standard rack-mount […]

AudioControl is now shipping the Architect Model 2660 — a 16-channel amplifier that outputs 65 watts via 8 ohms, 100 watts via 4 ohms and designed to also be bridged as a high-power 8-channel amplifier at 175 watts per channel. AudioControl says the Architect Model 2660 was designed specifically for the custom integrator channel and […]

HARMAN’s Crown Audio today announced it has added two models to the DriveCore Install (DCi) Network Series amplifier lineup with the introduction of its DCi 4|2400N, DCi 2|2400N and DCi 2|1250N power amplifiers. The new amplifiers incorporate HARMAN’s new DriveCore technology that is spec’d to deliver high power output from a compact, energy-efficient form factor […]

JBL’s new DrivePack incorporates Crown Audio’s BCA (Balanced Current Amplification) Class I circuitry, with temperature-compensated modulation. Crown says its feedback circuitry enables lower noise and distortion specifications than any other high-power switching amplifier on the market. Three-channel units offer a full rated output power of at least 6,000-watt peak, 3,000-watt continuous. Each JBL DrivePack is […]

JBL Professional today announced the introduction of its SRX800 Series portable powered loudspeakers that integrate both JBL transducers and Crown DriveCore amplifiers. JBL SRX800 Series models include the 12-inch two-way SRX812P, 15-inch two-way SRX812P, dual 15-inch three-way SRX835P, 18-inch SRX818SP subwoofer and the SRX828SP, the world’s only dual-18-inch powered subwoofer at this price point. The […]

Apogee Electronics’ new Groove is a new portable USB DAC and headphone amp for listening to music on your Mac or PC. Apogee says that Groove unlocks the highest possible quality of any headphones or powered speakers you have — it’s taking the native audio file and converting it to 3.5 millimeter using a DAC […]

Built as a replacement of Stealth Acoustics’ 255R model, the new SA255 includes Stealth’s new blue back-lit front panel graphics and features a variable low-pass filter for use with Stealth, or other passive subwoofer speakers, and provides 350 watts of power at 4 ohm loads. The filter stage can be bypassed to allow for full […]