Biamp Intros New Amplifiers


Biamp introduces the first enterprise-ready rack-mounted amplifiers with 100 percent asymmetric power distribution at ISE 2019 in Stand 3-B120. Designed for sound reinforcement, the new amplifiers are offered in two models: Tesira 1200.1 — four-channel, 1200-watt amplifier, single asymmetric bank Tesira 1200.2 — four-channel, 2400-watt amplifier, dual asymmetric banks The only true single-cable amplifier solution, […]

Read more

QSC Introduces CX-Q Series Network Amplifiers


QSC today announces new network power amplifiers for the Q-SYS Ecosystem. As a native peripheral of the Q-SYS Ecosystem, The CX-Q Series network amplifiers can take advantage of network routing capabilities as well as advanced processing, control, monitoring and loudspeaker output load. These amplifiers also assist Q-SYS in deploying signature QSC technologies like Intrinsic Correction, […]

Read more

Crestron Adds Modular Amplifiers and Loudspeakers to Its Enterprise Audio Solutions


Crestron announced today it has expanded its enterprise audio solutions with two new modular amplifiers, the AMP-225 and AMP-150-70 and its new line of Vector loudspeakers for large commercial spaces. The AMP-225 (two channels @ 25 watts each 8 ohm) and AMP-150-70 (one channel @ 50W 70V) have EnergyStar certification, built-in fault protection, and modular construction. Using a slide-rail design and measuring a quarter-rack size, multiple units can […]

Read more

AudioControl Unveils the Director Model M4840 Multi-Zone Amplifier


AudioControl has introduced The Director M4840 amplifier for whole-house entertainment, engineered into a new form factor that is over 30 percent shallower than traditional rack-mounted amplifiers. The Director Model M4840 delivers an unmatched combination of features, superb sound quality and fine-tuning capability all within a compact form factor that is a scant 11.5-inches deep, elevating it far above all […]

Read more

AudioControl Ships The Director Model M6800 16-Channel High-Power Amplifier With DSP


AudioControl is shipping the new Director Model M6800 amplifier, a 16-channel matrixing amplifier designed to be the hub of an entertainment system. Director Series amplifiers from AudioControl feature DSP (digital signal processing), enabling integrators to precisely calibrate each zone in order to deliver the finest sound possible. The Director Model M6800 is available now exclusively […]

Read more

Bose Professional Ships New Line of PowerShare Adaptable Amplifiers


Bose is now shipping its new PowerShare adaptable power amplifier line, consisting of three 1U models: two- and four-channel fixed-install models (PS602 and PS604) and one two-channel portable amplifier (PS602P). Each model delivers 600 watts of power that can be shared across all output channels. With support for both low- and high-impedance loads up to […]

Read more

Extron Ships Small Two Channel Amplifier for High Impedance Systems


Extron is shipping the Extron XTRA Series XPA 1002-70V, a half rack 1U, convection cooled power amplifier delivering two channels of 100 watts rms for 70 volt distributed speakers. This professional grade amplifier features a 100 dB signal-to-noise ratio and 0.1 percent THD+N specifications. The XPA 1002-70V is an ENERGY STAR qualified amplifier with an […]

Read more

LAB GRUPPEN’s Smallest LUCIA Amplifiers Debut


Following on the launch of LUCIA 70 V output models during last year’s InfoComm show, LAB GRUPPEN is set to unveil three new LUCIA 60-watt power models at InfoComm in Las Vegas: LUCIA 60/2M, LUCIA 60/2 and LUCIA 60/1-70. Available with either four-in, four-out matrix-mixer (LUCIA 60/2M), two-in, two-out configuration (LUCIA 60/2) or two-in, one-out […]

Read more

Martin Audio Debuts MA5.0Q Amplifier


Claiming a new eco-friendly design, Martin Audio’s new MA5.0Q power amp is designed for both portable and installed systems and specified with four channels of 5,000 watts in a 1 RU enclosure. Minimum heat dissipation makes the MA5.0Q suitable for hot or otherwise challenging environments using a patented Class D output stage design. The MA5.0Q […]

Read more

Mackie Launches Reach All-In-One Pro-Grade PA


Mackie today announced a new professional-grade PA system called Mackie Reach. Featuring Bluetooth music streaming, a six-channel digital mixer, and a control app for iOS and Android, Reach is a self-contained PA system. Integrated with a new ARC array, which they say provides “clearer” sound in large-audience environments, and EarShot — personal monitoring system, the […]

Read more

Biamp Adds to Tesira Amplifiers


Biamp Systems introduced four new amplifier models to it’s Tesira’s network amplifiers lineup. The four include the four-channel 175-watt AMP-4175R, the eight-channel 150-watt AMP-8150R, the four-channel 350-watt AMP-4350R, and the four-channel 300-watt AMP-4300R CV with constant voltage. The amplifiers feature dual AVB/TSN ports for tnetwork redundancy and feature slots for optional analog failover cards to continue signal flow if the […]

Read more

PreSonus Intros HP2 Personal Headphone Amplifier


Designed for live events without compromising audio quality, the PreSonus HP2 stereo personal headphone amplifier is designed for driving wired in-ear monitors (IEMs), as well as headphones. Portable and compact, it offers two XLR line-level inputs and one stereo 1/8-inch headphone output with volume control. Operation can be switched between stereo and mono, and a […]

Read more

Bose Professional Expands FreeSpace Amplifier Line with Four New Models


Bose Professional has broadened its FreeSpace amplifier line with a set of four dual-channel amplifiers optimized for premium commercial applications such as retail, restaurants and hospitality. There are two mixer amplifiers (IZA 2120-HZ, IZA 2120-LZ) and two expansion amplifiers (ZA 2120-HZ, ZA 2120-LZ) each at 120 watts per channel. FreeSpace amplifiers can be quickly configured […]

Read more

Extron Ships NetPA Compact Audio Power Amplifiers with Dante


Extron has announced the availability of the Extron NetPA 502 AT and NetPA 1001‑70V AT, half rack 1U, convection cooled power amplifiers equipped with Dante digital audio networking. The NetPA 502 AT delivers two channels of 50 watts into 4 ohms, and the NetPA 1001‑70V AT provides a single channel of 100 watts at 70 […]

Read more

Bose Professional Expands FreeSpace Amplifier Line with Four New Models


Bose Professional has broadened its FreeSpace amplifier line with a set of four dual-channel amplifiers optimized for premium commercial applications such as retail, restaurants and hospitality. There are two mixer amplifiers (IZA 2120-HZ, IZA 2120-LZ) and two expansion amplifiers (ZA 2120-HZ, ZA 2120-LZ) each at 120 watts per channel. FreeSpace amplifiers can be quickly configured […]

Read more

Bogen to Debut Four New Lines at InfoComm


Bogen Communications will be introducing several new products at InfoComm 2015 including a line of compact, half-rack width amplifiers; a 500-watt amplifier; a compact line array loudspeaker system; and a digital loudspeaker controller. The CC4062MBT is the latest model in the CC-Series of amplifiers which are 40-watt compact amplifiers with varying inputs and features. The […]

Read more

HARMAN’s Crown Introduces XLS DriveCore 2 Amplifiers With Upgraded Features and Flexibility


HARMAN’s Crown Audio today announced the introduction of the XLS DriveCore 2 Series two-channel power amplifiers, offering a host of upgraded features including more flexible DSP band pass filtering, selectable input sensitivity, remote sleep mode trigger and sleek new styling. Four new XLS DriveCore 2 models are available including the XLS 2502, XLS 2002, XLS 1502 and […]

Read more

Bryston Expands BIT Lineup of AC Power Isolation Devices


Bryston has launched the new BIT (Bryston Isolation Transformer) models aimed at larger applications. The new 45- and 60-amp models feature a 220/240-volt input with a 120-volt output and are available with or without AVR technology (Automatic Voltage Regulation). In addition to these new models, all BIT products will now be available with standard rack-mount […]

Read more

Stealth Acoustics Ships SA255 350W Mono Amp


Built as a replacement of Stealth Acoustics’ 255R model, the new SA255 includes Stealth’s new blue back-lit front panel graphics and features a variable low-pass filter for use with Stealth, or other passive subwoofer speakers, and provides 350 watts of power at 4 ohm loads. The filter stage can be bypassed to allow for full […]

Read more

Integra Ships 9-Channel Amp


Dubbed the DTA-70.1, the new 9-channel home theater power amplifier is rated at 150 watts per channel and, according to Integra, it’s the industry’s first 9-channel power amp specifically designed for home theater apps. After being tested by THX, the Integra DTA-70.1 was awarded their top-level THX Ultra2 certification, supposedly indicating its ability to drive […]

Read more

2010 Meets 1970 with the Stingray iTube – A Tube-Based Amp with an iPod Dock


Manley’s newest addition is a throwback-looking amp (totally tube based), but it incorporates an iPod dock inside the front of it.  Dubbed the Stingray iTube, it’s identical to the Stingray, originally launched in 1997 –but adds the iPod dock right out front. The iPod is integrated into the Stingray iTube as the 4th input source. […]

Read more