Powersoft has extended its fixed install ranges with the introduction of the two-channel Duecanali 6404 DSP+D and the four-channel Quattrocanali 8804 DSP+D. Both products feature Dante digital audio networking architecture and onboard, high-end signal processing, as well as deliver 175 Vpeak, making them ideal for high SPL applications, such as clubs and performance venues and stadiums.

As with the other models in their respective ranges, the new Duecanali 6404 DSP+D and Quattrocanali 8804 DSP+D amplifier platforms can deliver this high level of performance at a competitive price point and with the same low operational cost and carbon footprint as any other Powersoft product.

With this new extension, the new Duecanali 6404 DSP+D and Quattrocanali 8804 DSP+D series now sit alongside Powersoft’s install dedicated amplifier platforms, addressing the requirement for small- and large-size applications where the channel count is limited, and the need for a flexible product to work with Hi-Z and Lo-Z systems is a must.

The new Duecanali and Quattrocanali models all feature Powersoft’s trademarked switch-mode power supply with Power Factor Correction (PFC), Smart Rail Management (SRM) and bridgeable switch mode fixed frequency Class D output circuit topology.

The Duecanali range can drive low impedance loads (2/4/8 ohm), and 70V/100V distributed lines selectable per channel delivering a maximum output power per channel of: 1800 W at 8 Ω; 3200 W at 4 Ω; 4600 W at 2 Ω; 9200 W at 4 Ω bridged; 6400 W at 8 Ω bridged; 4000 W at 100 Volt and 3200 W 70 Volt.

The series provides status feedback via its front panel LED display or a connected PC running ArmoníaPlus software.

In just 1 RU, the Quattrocanali series offers smaller dimensions, lighter weight and the traditionally amazing sound quality and reliability of all Powersoft products.

Quattrocanali Series amplifiers implement a high-efficiency, microprocessor-controlled power supply with built in PFC (Power Factor Correction) that allows flawless worldwide operation with any AC mains voltage in the range 85-275 VAC tolerant to peak up to 400 V. The patented SRM (Smart Rails Management) technology allows to maximize the efficiency of the system and drastically reduce power consumption at any load and usage condition.

Both of the products can integrate within a networking environment through standard Cat5-cabled and Wi-Fi networks. Remote access via the Armonía Plus allows for full operability, including monitoring and diagnostics, from a decentralized location — via laptop, PC, tablet or smartphone. The fully customizable interface seamlessly integrates all devices in one easy-to-manage screen, so that everything displayed can be monitored.