THE #1 AV NEWS PUBLICATION. PERIOD.

PESA Intros 16×16 HD-SDI Matrix Switcher

pesa-PRO-3GSDI-1616-JPEG-0212PESA launched the new PRO-3GSDI-1616 matrix switcher today, claiming it supports all common SMPTE and ITU standard serial digital video signals, as well as embedded audio and other ancillary data required for HD-SDI and DVB/ASI broadcast sources. For digital cinema high definition video distribution requirements, it can be configured to switch SMPTE 372M dual-link HD-SDI in configurations up to 8×8.

PESA says the PRO-3GSDI-1616 supports standard data rates from 50Mbps to 3Gbps and video transports up to 1080p/60 and that all inputs are auto-equalized. With standard SMPTE formatted outputs, each signal is auto-sensed and re-clocked to the appropriate transport stream. Signals can be re-clocked up to 100m for 1080p/60. For non-standard formats, re-clocking circuitry can be set to bypass mode. Two independent reference inputs allow easy selection of genlock from a black burst or tri-level sync source.

Two models are available: the PRO-3GSDI-1616-C and the PRO-3GSDI-1616-PB, which includes a local pushbutton control panel. Both models feature an internal power supply and can have multiple remote control panels added via an Ethernet interface. The PRO-3GSDI-1616’s 1RU frame design features front load, hot swappable card sets, and includes space for an optional redundant power supply and controller module.

It’s not on the company’s website yet, but when it is, it’ll be here: http://www.pesa.com/

Top