Introducing the Benchmark AV VideoLynx HDMI over IP matrix switch
Introducing VideoLynx, the worlds first Gigabit HDMI over IP matrix switch
Imagine a 24 port HDMI matrix, with any combination of inputs to outputs from 1×23, through 12×12 to 23×1, and everything in between, rendering conventional HDMI matrix switchers obsolete.
Imagine that matrix did not require expensive and complex 3rd party control systems and software, but had a control surface BUILT IN via it’s own web interface. A control system that was so simple end users could easily configure and reconfigure it at will, routing HDMI sources to screens with simple check boxes. No “expert” required.
Imagine for ULTIMATE simplicity, end users could configure up to 12 Presets with different combinations of inputs to outputs on each.
Imagine if that matrix would enable you to use simple, low cost HDMI over IP extenders of your choice up to and including 4K in a Many to Many configuration with the worlds simplest setup, smashing the 30m end to end rule for conventional HDMI matrix switchers to a whopping 240m end to end over inexpensive CAT5 cable or your existing structured cabling network. Create an HDMI over IP matrix system at less than 1/10th of the cost of existing solutions, with the added benefit that deployment is a breeze and configuration requires NO SPECIALIST KNOWLEDGE.
Welcome to the Benchmark AV VideoLynx HDMI over IP matrix switch