THE #1 AV NEWS PUBLICATION. PERIOD.

Altinex Debuts Neutron MT312-104 Control Card

MT312-104-Front-Panel-0716Altinex just launched the Neutron MT312-104 Control Card for use with the company’s MT302-201 Digital MultiTasker.

The Neutron MT312-104 Control Card provides control of both serial and IR devices and includes two relays and two sensor inputs – the relays can be used to control external equipment such as screens. The sensor inputs are used to trigger events based on voltage levels supplied by motion sensors, heat sensors, light sensors, RF sensors, etc. The sensor connector also provides two voltages — +12VDC and +24VDC — for powering external sensors.

The Neutron MT312-104 Control Card is capable of supplying information third party controllers over Ethernet port. By connecting to the MultiTasker enclosure’s IP address, you can check the status of the relays (open or closed), the input status of the sensor inputs (high or low) based on trigger level, or request RS232 data from devices connected to the RS‑232 ports.

The MT312-104 Control Card can store IR codes in its internal memory for direct control of external IR devices. Alternatively, an IR room receiver such as the Altinex AC301‑103 can be used to pass‑through IR signals from remote controls to devices connected to one or both of the controller’s IR outputs. Multiple control cards can be used within single MT302-201 enclosure to enable unlimited expandability and control of AV system with unlimited capacity.

Here are the details.

Top