Digital Projection International (DPI) recently launched two new high-lumen, budget-oriented E-Vision laser projectors. Building on the success of the E-Vision Laser 8500, DPI debuted an E-Vision Laser 6500 and 7500. These displays bring a variety of price points, capabilities and installation flexibility to the already recognized E-Vision series.
The E-Vision Laser 6500 is specified at 6,500 lumens, a 5,000:1 contrast ratio and includes a DICOM simulation mode. A key differentiator for the E-Vision Laser 6500 rests in its quiet operation. Inputs include DVI, HDMI and an HDBaseT interface with built-in support for transmission of uncompressed high definition video over standard CAT5e/6 LAN cable. This also allows the projector to be placed up to 100m from the source with a low-cable cost. For ease of use, the E-Vision Laser 6500 also contains built-in compatibility with Crestron RoomView Connected, PJLink – AMX SSDP and LAN.
Built on the same electronics and functionality as the E-Vision Laser 8500, the E-Vision Laser 7500 delivers a wealth of features: incredible brightness at 7,500 lumens, geometry correction and edge blending, Lens Memory presets, and advanced capabilities such as DICOM simulation mode. With features galore and brightness to spare, the E-Vision Laser 7500 thrives in most any commercial application needing a bright, consistent and reliable imaging solution. For applications needing an ultra short throw solution, the E-Vision Laser 7500 can be paired with DPI’s newly launched 0.38:1 Ultra Short Throw (UST) lens. This projector/lens combo is capable of creating an image width between 6.9’ to approximately 24’ and offers ultimate flexibility of projector positioning. Inputs include Displayport, DVI, HDMI and an HDBaseT interface with built-in support for transmission of uncompressed high definition video over standard CAT5e/6 LAN cable. For ease of use, the E-Vision Laser 7500 also contains built-in compatibility with Crestron RoomView Connected, PJLink – AMX SSDP and LAN.