Audio-Technica Ships System 10 PRO Rack-Mount Digital Wireless System Configurations

Audio-Technica is now shipping two new packaged configurations of its System 10 PRO Rack-Mount Digital Wireless System: ATW-1366 System 10 PRO Rack-Mount Digital Wireless System with Boundary Microphone/Transmitter and ATW-1377 System 10 PRO Rack-Mount Digital Wireless System with Microphone Desk Stand Transmitter. Previously, the ATW-T1006 System 10 Boundary Microphone/Transmitter and ATW-T1007 System 10 Microphone Desk Stand Transmitter were available as individual components, as integrators/contractors generally source these pieces separately to configure a system to spec.

The ATW-1366 configuration includes ATW-RC13 Rack-mount receiver chassis, two ATW-RU13 receiver units and two ATW-T1006 System 10 Boundary Microphones/Transmitters. The ATW-1377 configuration includes ATW-RC13 Rack-mount receiver chassis, two ATW-RU13 receiver units and two ATW-T1007 System 10 Microphone Desk Stand Transmitters.

The ATW-1366 and ATW-1377 System 10 PRO configurations are now available as follows:

  • ATW-1366 System 10 PRO Rack-Mount Digital Wireless System with two Boundary Microphones/Transmitters: $1,349.00
  • ATW-1377 System 10 PRO Rack-Mount Digital Wireless System with two Desk Stand Microphones/Transmitters: $1,249.00

Designed to work with phantom-powered, condenser gooseneck microphones with a 3-pin XLRM-type output, the ATW-T1007 System 10 Microphone Desk Stand Transmitter pairs with the System 10 PRO or System 10 digital wireless receiver of your choice to provide 2.4 GHz wireless performance. The transmitter is equipped with a 3-pin XLRF-type input and features a touch-sensitive user switch that can toggle between talk and mute modes or function as a press-to-talk or press-to-mute button. Two red/green LEDs – one visible from the front of the unit, the other from the rear – indicate toggle/talk/mute mode, battery level and charging status. The ATW-T1007 offers three levels of input gain (-6 dB, 0 dB and +6 dB), which can be selected via a switch on the bottom of the unit. Another switch engages the low-cut filter.

Designed for conference rooms and other meeting spaces, the ATW-T1006 System 10 Boundary Microphone/Transmitter pairs with any System 10 PRO or System 10 digital wireless receiver to provide sound quality with 2.4 GHz wireless performance. This cardioid condenser boundary mic is also equipped with a touch-sensitive user switch that can toggle between talk and mute modes, or function as a press-to-talk or press-to-mute button. Two red/green LEDs – one visible from the front of the unit, the other from the rear — indicate toggle/talk/mute mode, battery level and charging status. The mic also offers three levels of input gain (-6 dB, 0 dB and +6 dB) and the low-cut filter switch.

See also  Audio-Technica Ships Spectrum-Efficient 6000 Series Wireless System

ATW-T1007 and ATW-T1006 features:

  • Digital 24-bit/48 kHz wireless operation
  • Operates in the 2.4 GHz range – completely free from TV interference
  • Gain Control switch allows selection of three input gain levels: -6 dB (loudest voices), 0 dB and +6 dB (softest voices)
  • Two red/green LEDs – one visible from the front of the unit, the other from the rear – indicate toggle/talk/mute mode, battery level and charging status
  • For both units, a 3.7V rechargeable lithium-ion battery provides nine hours of use on a full charge and is recharged with the included USB charging cable.
  • User switch can be set to toggle between talk and mute modes, or function as a press-to-talk or press-to-mute button
  • Switchable low-cut filter’System ID Display located on bottom of unit

The System 10 PRO Rack-Mount operates in the 2.4 GHz range and the rack-mount chassis houses one or two receiver units that can be operated locally within the chassis or be removed and mounted remotely (up to 300 feet away) via Ethernet cable. Audio-Technica claims that this approach to delivering wireless increases the versatility of the system while also greatly enhancing wave propagation — without the substantial expense of adding an antenna distributor and corresponding cables. Additionally, up to five System 10 PRO chassis (10 receivers) can be linked together using the RJ12 cable included with each system, creating a stable multichannel system with the simultaneous use of up to 10 channels.

The specs are here.

Sara Abrons

About Sara Abrons

Sara Abrons is editor-in-chief of rAVe [Publications] and a graduate of the School of Media and Journalism at the University of North Carolina at Chapel Hill. Reach her at sara@ravepubs.com or on Twitter @SaraAbrons.