AC-MX44-AUHD-HDBT AVProConnect Is 18Gbp Switcher

AVProConnect’s 18Gbps AC-MX44-AUHD-HDBT is a 4×4 HDBaseT matrix switcher. Each output block switch contains both a mirrored HDMI and HDBaseT port capable of handling full 18Gbps video signals with HDR metadata. 

Along with high bandwidth distribution, features include IR and RS232 control, EDID management, scaling, audio matrixing, audio delay and more. This matrix supports HDMI 2.0(a/b), HDCP 2.2, up to 4K video resolution, and up to 18 Gbps bandwidth via category cable by using a proprietary HDBaseT technology called ICT (Invisible Compression Technology). This matrix equalizes and amplifies the output to ensure the HDMI signal can be transmitted through long HDMI cables without loss of quality. This matrix features: 

  • HDMI 2.0(a/b)
  • 18Gbps uncompressed bandwidth support on HDMI
  • 18 Gbps with ICT on HDBaseT outputs
  • 4K60 4:4:4 support
  • Full HDR Support (HDR 10 & 12 Bit)
  • Dolby Vision, HDR10+ and HLG Support
  • HDCP 2.2 (and all earlier versions supported)
  • 1080p > 4K up-scaling on HDMI outputs
  • 4K > 1080p down-scaling on HDBaseT outputs
  • Advanced EDID management
  • IR, RS232 and LAN control options
  • Digital Toslink Out (7CH PCM, DD, DD+, DTS, DTS-MA)
  • Built-in Test Pattern on each output to verify infrastructure
Sara Abrons

About Sara Abrons

Sara Abrons is editor-in-chief of rAVe [Publications] and a graduate of the School of Media and Journalism at the University of North Carolina at Chapel Hill. Reach her at sara@ravepubs.com or on Twitter @SaraAbrons.